Polar Metalli Oy

Menu

Ajankohtaista

Grillin kokoaminen

Grill assembly instructions

  1. Make sure that there is sufficient replacement air, such as the use of air inlets under the grill
  2. Attach the tabletop brackets to the wooden tabletops and put the tabletops in their designated places.
  3. Attach the pipe frame to the grill. The locking ring equipped with a wing nut should be attached underneath the grilling apparatus that is attached to the pipes. Looking at the grill from the front, place the grill grating on the left, and the others on the right.
  4. Turn the hood upside down and attach the brackets shown in the picture using wing screws.
  5. Lift the hood into place.
  6. Assemble the pieces of the chimney pipe system in the following order:
    1. Put the straight pipe on top of the hood collar.
    2. Place the pleated part of the pipe inside the first part (with the pleat down)
  7. Parts to be installed from the roof:
    1. the lengthening pipe with the collar inside the previous pipe section
    2. Fit the rain hat on top (using the long wing screw)